If you have purchased a TASER C2 then it is very important that you know how to use it properly so you can have the best self defense possible. There are many things about a TASER you should know so you can use it effectively against an attacker. The first step, of course, is to read the directions and Owner’s manual that came with the TASER you purchased. Also, most importantly, take the time to review the included Training DVD that comes with every TASER C2.
The way the unit gets power is by using a Lithium battery cartridge. This cartridge is very well designed and contains enough energy to power the TASER C2 for 50 firings. Make sure before you put the battery cartridge in that you have not inserted the magazine cartridge first. You don’t want to do that. Always place the battery cartridge in first followed by inserting the magazine cartridge. When you have both cartridges in correctly you will see a green light. This signifies that your TASER C2 is ready for action.
The next thing you need to do is load your air cartridges. Make sure the safety switch cover is closed and that the TASER is pointing in a safe direction. Remove the cartridge cover at the front of the C2 and insert the cartridge until you hear it click. That indicates it is locked in place. Just to make sure, gently pull on the sides of the cartridge. There is not an “up” or “down” on the air cartridges so you don’t have to worry about putting the cartridge in wrong. This is also a nice feature for when you are under any stress so you can reload quickly if needed. Each cartridge carries the probes, wire, and compressed air. Do not try to open these cartridges.
When you hold the unit you hold it as you would a handgun, vertically. There is a safety switch cover that you open to expose the firing button. Do not fire at an attacker that is more then 15 feet away. That is the maximum range of the C2. All TASER C2 models, except one, have a laser-aiming device. When aiming at a target keep in mind that where ever you see the laser, that is where the top probe will approximately land. If your safety permits, try to avoid aiming at the face, neck, head or groin area.
The spread of the two probes varies with the distance you are away from an attacker. For the best results try to be about 7 to 10 feet away from him. At this distance your probe spread will be about 16 inches which is what we want. This will produce maximum effectiveness. Try to make sure you get more then a 4 inch spread of the probes.
You should always practice firing with the unit before you actually need to use it. You can practice across the room at targets to get the best feel for the C2. TASER units have little miniature barbs in them that will actually puncture the skin or penetrate clothing to send the electrical volts and wattage into the body. When you are ready to use a TASER C2, flip the safety switch to expose the firing button and you will see a light that will be the indicator that the gun is ready to fire.
There is also a stun capability backup called the Drive Stun Back Up. This means that if you just happen to run out of cartridges and you still need to disable an attacker you can approach the person and use the stun gun functionality. The TASER C2 has two stun gun electrodes that will allow you to depress the volts into the attacker’s neck or other exposed body part and then make your escape.
After you have fired the TASER C2 and your attacker is on the ground, drop the unit and run. Run as fast as your little feet will take you. A great thing about the manufacturer of the unit, TASER International, is that they will replace your unit if you have had to use it during an attack. Simply send them a copy of the police report.
